Redesign and bathroom remodeling can be expensive. If properly designed and constructed, they can be an important source resale value and attractiveness to show the personality and creativity of the homeowners. Bathroom vessel sinks are a way to add a strong element of design even in the smallest and most traditional bathrooms.
According to Michael Terrill, senior product manager for bathroom furniture and sinks Kohler Co., a distinctive bathroom vessel sinks is a perfect way to make a firm statement in your bathroom. “The falling prices of the stone make the granite and marble have become commonplace, so people are trying to express themselves in other ways, through the glass, stone, porcelain, marble and metals that can be sinks used in above-the-counter “he says. With a wide range of styles and materials available, there is a basin for nearly every decor.
Wood sinks may seem impractical until you remember that the wood has been a primary building material for thousands of boats. Oak, teak and bamboo are common woods for bathroom vessel sinks that adds warmth to any bathroom. China and porcelain vessel sinks are widely available and provide a durable finish at a low cost. They come in solid colors or plain white painted decorative finishes as blue ware.
Best Way to Installing Bathroom Vessel Sinks
Bathroom vessel sinks – Determine the location for the new sink. Place the paper template that comes with the sink on the counter and use a pencil to draw the drain opening. Drill a hole in the counter top using a drill accessory 1 inch to start the hole. Use a jigsaw, started by inserting the sheet into the drilled hole, and follow the perimeter drawn to create the mounting hole. Slip the bathroom vessel sinks into place and the hole to rest easily on the counter as squarely as possible. Apply silicone caulk in the joint between the base of the sink and the water meter to create a tight join. Connect the accessories to the sink drain by accessing the bottom through the lower cabinet. Apply a rubber washer and the compression ring to the bottom of the sink drain and hand tighten it. Connect the trap to the compression fitting and tighten down completely with a socket wrench or adjustable pliers. Then connect the trap to the main line of the house drain running down the wall or floor. Install faucet and water supply lines for use with sink. Run water into the sink and check connections below the leak or leaks in the compression fitting to bathroom vessel sinks. Tighten loose connections or add additional caulk as needed.